Carbon Video Slider 100 Support Set

• Professional video slider for accurate, wobble-free camera tracking
• 100 cm travel
• High-quality materials (carbon and CNC-milled aluminium)
• Foldable and highly adjustable rubber feet
• High load-bearing capacity
• Camera slide with bubble level and friction adjustment
• 3/8-inch thread pin for video panhead and ball head
• Many 1/4 inch and 3/8 inch threads for tripod assembly
• Light and transportable
• 2 Very sturdy and high-quality swivel arms (friction arm) with a large central control wheel and central grating
• Can take a load of up to 5 kg, total length 53 cm, arm diameter 2 cm
• Two 5/8 inch spigot connectors with 1x 1/4 inch and 1x 3/8 inch inner thread
• Suitable for assembly on DSLRs, video cameras, lighting, flash head, and much more.
• 2 super clmaps as the ultimative attachment tool in the studio
• almost unlimited possibilities
• fits lamp tripods, background frames, extension arms, edges, plates and so on
• clamping area of approx. 10-60mm
• fits absolutely securely
• connection for 5/8 inch spigot

The walimex pro Carbon Video Slider Pro deserves its name – it is a professional tool with which you can perform wobble-free and gentle camera tracking, increasing the quality of your films considerably.

The slider is extremely well-made and, thanks to precisely produced carbon tubes and CNC-milled aluminium parts, can also meet professional requirements. Thanks to the materials used, all three carbon slider models are stable and yet very light.

To be operational in all situations, and on all filming locations, the slider has an adjustable boom with grating and height-adjustable rubber feet to ensure it stands securely and horizontally at all times.

The large camera slide has both a rubberised contact surface to protect the bottom of the camera and an in-built bubble level to make it easier to place the slide down level. The rollers, thanks to the very good bearings, run smoothly on the carbon tubes without any noticeable stutters or vibrations. Extremely smooth camera travel can be achieved with slider lengths of 80 cm / 100 cm / 120 cm, throughout the entire slide length. The carriage offers, with its 3/8-inch thread pin, the correct connection for a video panhead or ball head. On the front side, there is a fastening screw with which it is possible both to adjust the friction and to block the camera slide, for example, when transporting it.

The slide, thanks to its sturdy construction and high-quality materials, is really “open to the world” and compatible with many recording devices, e.g. with professional cinema cameras, DSLRs, mirrorless cameras / CSC, action-cams, smartphones (compatible smartphone holders are optionally available) and video cameras.

And because we literally want to put on more, we have tested the maximum load-bearing capacity in the studio. And see – you can really lay it on: 25 kg (80 cm) / 23.5 kg (100 cm) / 21.5 kg (120 cm) – so, even with heavy camera equipment, wobble-free travel over the entire length of the slider is possible.

The slider comes with a padded carry bag in which it can be further tied down with two retention straps – the smooth carbon tubes and the light runners are always protected during transportation and when not being used to ensure wobble-free and gentle camera travel.

The walimex pro Carbon Video Slider Pro set includes three models: 80 cm (art. no. 21237), 100 cm (art. no. 21238) and 120 cm (art. no. 21239). This means that you will have the right slider for all occasions.

swivel arms or friction arms are now essential pieces of photography and video-making equipment – whenever you wan to attach, adjust or lock or just secure your equipment, there’s no way around using a swivel arm. In addition to smaller swivel arm variations with a 1/4 inch connector (art. No. 18316 with 18 cm or art. no. 18582 that is 28 cm in length) that can be used with video rigs and in tabletop photography, walimex pro now also offers the large friction arm model made to be extremely sturdy for heavy loads such as DSLRs, video cameras, light, flash heads etc.!

Both arms have 5/8 inch spigots and are, therefore, compatible with all current super clamps (e.g. walimex pro super clamp art. No. 12499) that have the corresponding spigot mount. Thanks to the inner thread (1x 1/4 inch and 1x 3/8 inch) in the spigots, almost any photo and video accessories can be screwed on or adapted, which once more extends the scope of this swivel arm enormously.

Features:

The large, grippy hand wheel means you can securely lock the swivel arm in the desired position. The grating in the middle axis prevents any additional slipping or dropping of the boom.

These dependable and sturdy swivel arms have been used for many years in areas other than photography and video productions. This multi-talent item is also used in events and in healthcare for safely securing equipment and for adapting medical devices.

It can hold approx. 5 kg, and the total length is 53 cm.

With this Super Clamp you will get the ultimate fastening tool for your studio. It provides almost unlimited possibilities, because it can be fastened on lamp tripods, extension arms, edges, plates and much more.